Introduce

    Magic AVI/VCD/DVD/IPod/MP4/PSP/3GP/SWF/MOV Maker Pro is a digital video converter/joiner/cutter.The main function of Magic Video Maker is to convert video files from one format to another, cut a part of file into new video file, combines multiple video clips into one large movie file, deploy sound again for each clip, extract audio from any audio an video files,edit audio file visually and record audio from any source. Support AVI,MPEG1/MPEG2(VCD,DVD,SVCD),IPod,MP4,3GP,PSP,PMP,Pocket pc(AVI),WMV,VOB,DAT(VCD),MOV,RM,RMVB,SWF,WAV,WMA,MP3,MP2,OGG,RA,AMR,AAC,AC3,RAW...

DownLoad    Buy Now($21.95)

FAQ

1. I converted a video file , but i can't play the converted file with Media Player, Why?
    It is because of there is not CODEC for this file in your system. You should install more CODEC to your system. You can install K-Lite Codec Pack on our recommendation. It is a free software for you. You can download it form http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm . 

2. Why I cannot play the mov, mp4, 3gp  file?  
    You must installed QuickTime 7 Player. [Downloads here]

3. Can I output the Divx format's movie?

   Yes. You must install Divx codec.In addition The K-Lite Codec Pack include them. After install Divx codec, you can select Divx in Video Compressor's combobox.

4.How to record sound from Microphone, DVD / VCD / CD Player, MP3 Player, RealPlayer, Windows Media Player, Web Page, Internet Conversation, Internet News, Internet Radio Station and the others?

Step 1. Click File->New to create a new waveform.
Step 2. Adjust Recorder Volume and make sure the volume slider is at least in half way and set the Volume Control to Record Source;
Step 3.Click Record button , you will see a wave pattern display of the recorded audio in waveform. Click Stop to end recording.
Step 4. To listen to your recording, click Play button for playback;
Step 5.You can save the audio data as various format audio file. Click the OutPut as menu item to save the whole audio data or click Output selection as ... menu item to save the selection.

5.How to merge two or more selections together?

Step 1. Open an audio file;
Step 2. Drag your mouse with left button down along the waveform until the point where you desire to select a session of the file;
Step 3.Click Edit->Copy   to copy the selection to the clipboard;
Step 4. Open another audio file;
Step 5. Move the mouse to the point where you want to paste the selection to and left click it;
Step 6.Click Edit->Paste to paste the previous selection into the second file. Now two audio files are in the same file, you can then edit them as you like, and save them as one file.

6.How to apply a special effect or filter?

Step 1. Open an audio file;
Step 2. Drag your mouse with left button down along the waveform until the point where you desire to select a session of the file;
Step 3.Click Process and transform->(effects and filters) ;
Step 4. Adjust the parameters, and then click the Ok button;
 

7. About Audio Process and transform

• Amplify Increase - Increase volume on selected part of audio file
• Amplify Decrease - Decreases volume on selected part of audio file
• Fade In - Creates a fading in (soft to loud) effect in the selected part of an audio file.
• Fade Out - Creates a fading out (loud to soft) effect in the selected part of an audio file
• Normalize - Normalization allows you to achieve the greatest amount of amplification that will not result in clipping (distortion). All parts of the wave are amplified at equal levels.
  
  For example, if the loudest peak of a waveform is at 80% and the quietest peak is at 20%, normalizing the file to 100% results in the waveform’s new loudest peak being 100%, and its new quietest peak being 40%.

• Chorus - Just as a chorus is a group of singers, the chorus effect can make a single instrument sound like there are actually several instruments being played. It adds some thickness to the sound, and is often described as 'lush' or 'rich'. 

• Delay - Delay can be used to create single echoes, as well as a number of other effects. Delays of 35 milliseconds or more will be perceived as discrete echoes, while those falling within the 15-34 millisecond range can be used to create a simple chorus or flanging effect. 
  
  By reducing the delay times further down into the 1-14 millisecond range, you can spatially locate a mono sound (a sound with the same information for both the left and right channels) so that it appears as though the sound is coming from the left or the right side, even though the actual volume levels for left and right of the wave are identical.

• Invert - This effect flips the audio samples upside-down. This normally does not affect the sound of the audio at all. It is occasionally useful, for example when the left and right channels of a song both contain equal amounts of vocals, but unequal amounts of background instruments. By inverting one of the channels and not the other, the vocals will cancel each other out, leaving just the instrumentals. Obviously this only works if the exact same vocal signal is present in both of the channels to begin with.
  
  Inverting doesn't produce an audible effect, but it can be useful in lining up amplitude curves when creating loops or pasting. If applied on a stereo waveform, both channels are inverted.

• Reverb - Reverberates selected part of an audio file.
• Reverse - Select this command to have the current selection play backwards by reversing the order of its samples. Reverse is useful for creating special effects. This effect reverses the selected audio; after the effect the end of the audio will be heard first and the beginning last. Some people reverse small portions of audio to make inappropriate language unintelligible, while others believe you can hear subliminal messages if you listen to speech backwards. You can also create interesting sound effects by recording natural events and reversing the audio.

• Flanger - Applies Flanging effect to the selected part of an audio file.
• Expander - Adds expander effect to the audio data array.
• Compressor - Reduces the dynamic range of a signal.
• Phaser - The name "Phaser" comes from "Phase Shifter", because it works by combining phase-shifted signals with the original signal. The movement of the phase-shifted signals is controlled using a Low Frequency Oscillator (LFO).

• Trim - Adds trim effect to the selected part of an audio file.
• Silence - Inserts a silence on selected part of audiofile
• Vibrato - Makes a Vibrato effect in the selected part of an audio file.
• Pitch Shift - Changes the frequency of the selected part of an audio file.
• Resample - Decreases or increases the rate of the selected part of an audio file.
• Stretch Time - Makes a Stretch effect in the selected part of an audio file, changing the pitch and duration.

• Insert silence - Insert silence in selected part of audio file

• Add Noise - Insert noise at the current selection

• Mix from file - Mixes the selected part of an audio file with another file.

Audio Filters

• Band Pass Filter - Applies Band Pass filter to the selected part of an audio file.
• High Pass Filter - Applies high Pass filter to the selected part of an audio file.
• Low Pass Filter - Applies low Pass filter to the selected part of an audio file.
• High Shelf Filter - Applies high shelf filter to the selected part of an audio file.
• Low Shelf Filter - Applies low shelf filter to the selected part of an audio file.
• FFT Filter  - Applies the Fast Fourier transform filter to the selected part of an audio file.
• FIR Filter - Applies Finite Impulse Response filter to the selected part of an audio file.
• Notch Filter - Applies the Notch filter to the selected part of an audio file.
• PeakEQ Filter - Applies Peak EQ filter to the selected part of an audio file.

System Requirements

• Windows 2000 or Windows XP.
• DirectX 9 runtime. [Downloads here]
• QuickTime Player 7 or above. (if you need playback and convert mov file) [Downloads here]
• Window Media Format runtime

How to Buy